XR16M598 Datasheet, PDF (47/58 Pages) Exar Corporation – 1.62V TO 3.63V HIGH PERFORMANCE OCTAL UART WITH 16-BYTE FIFO

XR16M598
REV. 1.0.0
1.62V TO 3.63V HIGH PERFORMANCE OCTAL UART WITH 16-BYTE FIFO
4.15 XCHAR Register - Read Only
This register gives the status of the last sent control character (xon or xoff) and the last received control
character (xon or xoff). This register will be reset to 0x00 if, at anytime, the Software Flow Control is disabled.
XCHAR [7:4] : Reserved
XCHAR [3]: Transmit Xon Indicator
If the last transmitted control character was a xon character or characters (xon1, xon2), this bit will be set to a
logic 1. This bit will clear after the read.
XCHAR [2]: Transmit Xoff Indicator
If the last transmitted control character was a xoff character or characters (xoff1, xoff2), this bit will be set to a
logic 1. This bit will clear after the read.
XCHAR [1]: Xon Detect Indicator
If the last received control character was a xon character or characters (xon1, xon2), this bit will be set to a
logic 1. This bit will clear after the read.
XCHAR [0]: Xoff Detect Indicator
If the last received control character was a xoff character or characters (xoff1, xoff2), this bit will be set to a
logic 1. This bit will clear after the read.
47