XR16M564 Datasheet, PDF (47/55 Pages) Exar Corporation – 1.62V TO 3.63V QUAD UART WITH 32-BYTE FIFO

REV. 1.0.0
XR16M564/564D
1.62V TO 3.63V QUAD UART WITH 32-BYTE FIFO
FIGURE 23. RECEIVE READY & INTERRUPT TIMING [FIFO MODE, DMA ENABLED] FOR CHANNELS A-D
RX
INT
RXRDY#
Start
Bit
Stop
Bit
S D0:D7 S D0:D7 T
D0:D7 S D0:D7 T S D0:D7 T S D0:D7 T S D0:D7 T
T_SSI
RX FIFO drops
below RX
Trigger Level
RX FIFO fills up to RX
Trigger Level or RX Data
T_SSR
Timeout
FIFO
Empties
IOR#
(Reading data out
of RX FIFO)
T_RRI
T_RR
RXFIFODMA
FIGURE 24. TRANSMIT READY & INTERRUPT TIMING [FIFO MODE, DMA MODE DISABLED] FOR CHANNELS A-D
TX FIFO
Empty
TX
(Unloading)
INT*
IER[1]
enabled
TXRDY#
Data in
TX FIFO
Start
Bit
Stop
Bit
S D0:D7 T
ISR is read
S D0:D7 T S D0:D7 T T S D0:D7 T S D0:D7 T
T_SI
ISR is read
TX FIFO fills up
to trigger level
T_WT
T_WRI
TX FIFO drops
below trigger level
IOW#
(Loading data
into FIFO)
*INT is cleared when the ISR is read or when TX FIFO fills up to the trigger level.
Last Data Byte
Transmitted
S D0:D7 T
T_SRT
TX FIFO
Empty
TXDMA#
47