XR17C154 Datasheet, PDF (19/62 Pages) Exar Corporation – 5V PCI BUS QUAD UART

áç
REV. 1.3.0
XR17C154
5V PCI BUS QUAD UART
MPIOLVL [7:0] (default 0x00)
Output pin level control and input level status. The status of the input pin(s) is read on this register and output
pins are controlled on this register. A logic 0 (default) sets the output to low and a logic 1 sets the output pin to
high. The MPIO interrupt will clear upon reading this register.
MPIOLVL Register
Multipurpose Output Level Control
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
MPIO7 MPIO6 MPIO5 MPIO4 MPIO3 MPIO2 MPIO1 MPIO0
MPIO3T [7:0] (default 0x00)
Output pin tri-state control. A logic 0 (default) sets the output to active level per register MPIO3T settling, a
logic 1 sets the output pin to tri-state.
MPIO3T Register
Multipurpose Output 3-state Enable
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
MPIO7 MPIO6 MPIO5 MPIO4 MPIO3 MPIO2 MPIO1 MPIO0
MPIOINV [7:0] (default 0x00)
Input inversion control. A logic 0 (default) does not invert the input pin logic. A logic 1 inverts the input logic
level.
MPIOINV Register
Multipurpose Input Signal Inversion Enable
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
MPIO7 MPIO6 MPIO5 MPIO4 MPIO3 MPIO2 MPIO1 MPIO0
MPIOSEL [7:0] (default 0xFF)
Multipurpose input/output pin select. This register defines the functions of the pins. A logic 1 (default) defines
the pin for input and a logic 0 for output.
MPIOSEL Register
Multipurpose Input/Output Selection
Bit-7 Bit-6 Bit-5 Bit-4 Bit-3 Bit-2 Bit-1 Bit-0
MPIO7 MPIO6 MPIO5 MPIO4 MPIO3 MPIO2 MPIO1 MPIO0
19