RFM66W Datasheet, PDF (82/87 Pages) List of Unclassifed Manufacturers – 868 & 915MHz Ultra Low Power High Link Budget Integrated UHF Transceiver

WIRELESS & SENSING
RFM66W
DATASHEET
7.2.2. Manual Reset
A manual reset of the RFM66W is possible even for applications in which VDD cannot be physically disconnected. Pin 6
should be pulled high for a hundred microseconds, and then released. The user should then wait for 5 ms before using the
chip.
VDD
Pin 6
Input
> 100 us
High-Z
‟‟1‟‟
Wait for
5 ms
High-Z
Chip is ready from
this point on
Figure 38. Manual Reset Timing Diagram
Note whilst pin 6 is driven high, an over current consumption of up to ten milliamps can be seen on VDD.
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com
Page 82