RFM66W Datasheet, PDF (75/87 Pages) List of Unclassifed Manufacturers – 868 & 915MHz Ultra Low Power High Link Budget Integrated UHF Transceiver

WIRELESS & SENSING
RFM66W
DATASHEET
Name
(Address)
RegSeqConfig1
(0x36)
Bits
Variable Name
Mode
Default
value
Description
7 SequencerStart
t
6 SequencerStop
t
5 SequencerLowPowerMode rw
4-3 SequencerTransitionFromI rw
dle
0x00
Controls the top level Sequencer
When set to „1‟, executes the “Start” transition.
The sequencer can only be enabled when the chip is in Sleep
or Standby mode.
0x00 Forces the Sequencer to go to Idle state
Always reads „0‟
0x00 Selects chip mode in LowPower state:
0: Stdby mode
1: Sleep mode
0x00
Control state-machine transition from the Idle state:
00: to LowPower or Idle state on a SequencerStart command,
depending on SequencerLowPowerState
01: to Receive state on a SequencerStart command
10: to Transmit state on a SequencerStart command
11: to WaitForFifo on a SequencerStart command
2 SequencerLowPowerState rw
1 SequencerTransitionFromL rw
owPower
0 SequencerTransitionFromT rw
ransmit
0x00
Defines the low power state of the Sequencer, reached at the
end of any action (transmission, reception, etc...)
0: to Idle state
1: to LowPower state
0x00 Control the Sequencer transition from the LowPower state:
0: to Transmit state on a Timer 1 interrupt
1: to Receive state on a Timer 1 interrupt
0x00
Control the Sequencer transition from the Transmit state:
0: to LowPower or Idle state on a PacketSent interrupt,
depending on SequencerLowPowerState
1: to Receive state on a PacketSent interrupt
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com
Page 75