RFM24W Datasheet, PDF (8/34 Pages) List of Unclassifed Manufacturers – ISM Transceiver module

RFM24W
Output Power Range¹
PTX
-40
— +11 dBm
Using switched current match
TX RF Output Steps²
P △ RF_OUT
within
—
6 dB of max power
TX RF Output Level²
Variation vs. Temperature
P △ RF_TEMP
–40 to +85℃
—
TX RF Output Level
Variation vs. Frequency²
P △ RF_FREQ
Measured across 902–928 MHz
—
Transmit Modulation
Filtering²
B*T
Gaussian Filtering Bandwith Time
Product
—
Harmonics²
P_2HARM Using reference design TX matching
—
network and filter with max output
P_3HARM power. Harmonics reduce linearly with _—
output power.
Spurious Emissions²
POB-TX1
POUT = 11 dBm,
Frequencies <1 GHz
—
POB-TX2 1–12.75 GHz, excluding harmonics
—
0.1 — dB
1
—
dB
0.5 — dB
0.5 —
— -42 dBm
— -42 dBm
— –54 dBm
— –42 dBm
Notes:
1. All specification guaranteed by production test unless otherwise noted. Production test conditions and max limits are
listed in the "Production Test Conditions" section in "1.1. Definition of Test Conditions" on page 11.
2. Guaranteed by qualification. Qualification test conditions are listed in the "Qualification Test Conditions" section in "1.1.
Definition of Test Conditions" on page 11.
3. Output power is dependent on matching components and board layout.
8
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com