RFM24W Datasheet, PDF (4/34 Pages) List of Unclassifed Manufacturers – ISM Transceiver module

1. Electrical Specifications
RFM24W
Table 1. DC Characteristics¹
Parameter
Symbol
Conditions
Min Typ Max Units
Supply Voltage
V_DD
Range
1.8 3.0 3.6 V
Power Saving Modes I_Shutdown
RC Oscillator, Main Digital Regulator,
and Low Power Digital Regulator OFF²
— 30 — nA
I_Standby
Register values maintained and RC
oscillator/WUT OFF.
— 50 — nA
I_Sleep RC Oscillator/WUT ON and all register values main- — 900 — nA
tained, and all other blocks OFF.
I_Sen- Low battery detector ON, register values maintained, — 1
sor-LBD
and all other blocks OFF.²
— µA
I_Ready
Crystal Oscillator and Main Digital Regulator ON,
all other blocks OFF.
— 1.8 — mA
TUNE Mode Current I_{Tune_RX}
RX Tune
— 6.5 — mA
RX Mode Current
I_{Tune_TX}
I_RXH
TX Tune
High Performance Mode
— 7.3 — mA
— 13 — mA
TX Mode Current
I_RXL
I_{TX_+10}
Low Power Mode
+10 dBm output power, Switched current match,
868 MHz
— 10 — mA
— 19 — mA
Notes:
1. All specification guaranteed by production test unless otherwise noted. Production test conditions and max limits are
listed in the "Production Test Conditions" section of "1.1. Definition of Test Conditions" on page 11.
2. Guaranteed by qualification. Qualification test conditions are listed in the "Qualification Test Conditions" section in "1.1.
Definition of Test Conditions" on page 11.
4
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com