RFM24W Datasheet, PDF (20/34 Pages) List of Unclassifed Manufacturers – ISM Transceiver module

RFM24W
The description of the “Start TX” command is shown in Figure 9 as an example. If a property has previously
been set or a default configuration is sufficient it is not necessary to write all arguments. For instance if the user
wants to command the part to TX state with the default or previous settings for CHANNEL[7:0],
TXCOMPLETE_STATE[3:0], etc then only the CMD 0x31 needs to be sent. It is not necessary to send the remaining
arguments unless it is desired to change these arguments.
Figure 9. Start TX Command Description
21
Tel: [phone] Fax: [phone] E-mail: [e-mail] http:/ / www.hoperf.com