KXCJK-1013 Datasheet, PDF (7/31 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KXCJK-1013
Rev. 2
Dec-2012
Table 5. Environmental
Parameters
Units
Min
Typical
Max
Supply Voltage (Vdd) Absolute Limits
V
-0.5
-
3.63
Operating Temperature Range
ºC
-40
-
85
Storage Temperature Range
ºC
-55
-
150
Mech. Shock (powered and unpowered)
g
-
5000 for 0.5ms
-
10000 for 0.2ms
ESD
HBM
V
-
-
2000
Caution: ESD Sensitive and Mechanical Shock Sensitive Component, improper handling
can cause permanent damage to the device.
This product conforms to Directive 2002/95/EC of the European Parliament and of the
Council of the European Union (RoHS). Specifically, this product does not contain lead,
mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB), or
polybrominated diphenyl ethers (PBDE) above the maximum concentration values (MCV) by
weight in any of its homogenous materials. Homogenous materials are "of uniform
composition throughout."
This product is halogen-free per IEC 61249-2-21. Specifically, the materials used in this
HF product contain a maximum total halogen content of 1500 ppm with less than 900-ppm
bromine and less than 900-ppm chlorine.
Soldering
Soldering recommendations are available upon request or from www.kionix.com.
Floor Life
Factory floor life exposure of the KXCJK reels removed from the moisture barrier bag should not
exceed a maximum of 168 hours at 30C/60%RH. If this floor life is exceeded, the parts should be
dried per the IPC/JEDEC J-STD-033A standard.
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2012 Kionix – All Rights Reserved
567-4177-1212061351
Page 7 of 31