KXCJK-1013 Datasheet, PDF (22/31 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KXCJK-1013
Rev. 2
Dec-2012
INT_SOURCE1
This register reports which function caused an interrupt. Reading from the interrupt release register
(INT_REL, 0x1Ah) will clear the entire contents of this register.
R
R
R
R
R
R
R
R
0
0
0
DRDY
0
0
WUFS
0
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
I²C Address: 0x16h
DRDY - indicates that new acceleration data (at Reg Addr 0x06h to 0x0Bh) is available. This
bit is cleared when acceleration data is read or the interrupt release register
(INT_REL, 0x1Ah) is read.
0 = New acceleration data not available
1 = New acceleration data available
WUFS - Wake up, This bit is cleared when the interrupt source latch register (INT_REL,
ox1Ah) is read.
0 = No motion
1 = Motion has activated the interrupt
INT_SOURCE2
This register reports the axis and direction of detected motion per Table 12. This register is cleared
when the interrupt source latch register (INT_REL, 0x1Ah) is read.
R
R
R
R
R
R
R
R
0
0
XNWU XPWU YNWU YPWU ZNWU ZPWU
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
I²C Address: 0x17h
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
Bit
XNWU
XPWU
YNWU
YPWU
ZNWU
ZPWU
Description
X Negative (X-) Reported
X Positive (X+) Reported
Y Negative (Y-) Reported
Y Positive (Y+) Reported
Z Negative (Z-) Reported
Z Positive (Z+) Reported
Table 12. KXCJK Motion Reporting
© 2012 Kionix – All Rights Reserved
567-4177-1212061351
Page 22 of 31