KXCJK-1013 Datasheet, PDF (23/31 Pages) List of Unclassifed Manufacturers – Accelerometer Specifications

± 2g / 4g / 8g Tri-axis Digital
Accelerometer Specifications
PART NUMBER:
KXCJK-1013
Rev. 2
Dec-2012
STATUS_REG
This register reports the status of the interrupt.
R
R
R
R
R
R
R
R
0
0
0
INT
0
0
0
0
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
I²C Address: 0x18h
INT reports the combined (OR) interrupt information of DRDY and WUFS in the interrupt
source register (INT_SOURCE1, 0x16h). This bit is cleared when acceleration data is
read or the interrupt release register (INT_REL, 1Ah) is read.
0 = no interrupt event
1 = interrupt event has occurred
INT_REL
Latched interrupt source information (INT_SOURCE1, 0x16h and INT_SOURCE2, 0x17h) is cleared
and physical interrupt latched pin (7) is changed to its inactive state when this register is read.
R
R
R
R
R
R
R
R
X
X
X
X
X
X
X
X
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
I²C Address: 0x1Ah
36 Thornwood Dr. – Ithaca, NY 14850
tel: [phone] – fax:[phone]
www.kionix.com - [e-mail]
© 2012 Kionix – All Rights Reserved
567-4177-1212061351
Page 23 of 31