RFM92 Datasheet, PDF (52/126 Pages) List of Unclassifed Manufacturers – Low Power Long Range Transceiver Module

RFM92W/93W V3.0
Table 22 Receiver Startup Time Summary
RxBw if AfcAutoOn=0
RxBwAfc if AfcAutoOn=1
2.6 kHz
3.1 kHz
3.9 kHz
5.2 kHz
6.3 kHz
7.8 kHz
10.4 kHz
12.5 kHz
15.6 kHz
20.8 kHz
25.0 kHz
31.3 kHz
41.7 kHz
50.0 kHz
62.5 kHz
83.3 kHz
100.0 kHz
125.0 kHz
166.7 kHz
200.0 kHz
250.0 kHz
TS_RE
(+/-5%)
2.33 ms
1.94 ms
1.56 ms
1.18 ms
984 us
791 us
601 us
504 us
407 us
313 us
264 us
215 us
169 us
144 us
119 us
97 us
84 us
71 us
85 us
74 us
63 us
TS_RE or later after setting the device in Receive mode, any incoming packet will be detected and demodulated by the
transceiver.
4.2.6.3. Time to RSSI Evaluation
The first RSSI sample will be available TS_RSSI after the receiver is ready: equivalently TS_RE + TS_RSSI after the
receive mode instruction was issued.
0
FSRx
TS_RE
Rx
Timeline
TS_RE
+TS_RSSI
Rssi IRQ
Rssi sample
ready
Figure 18. Time to Rssi Sample
TS_RSSI depends on the receiver bandwidth as well as the RssiSmoothing option that was selected. The formula used to
calculate TS_RSSI is provided in section 2.5.4.
Page 52
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com