RFM92 Datasheet, PDF (120/126 Pages) List of Unclassifed Manufacturers – Low Power Long Range Transceiver Module

RFM92W/93W V3.0
This example is achieved by programming the Sequencer as follows:
Table 47 Beacon Mode Settings
Variable
IdleMode
FromStart
LowPowerSelection
FromIdle
FromTransmit
Effect
1: Sleep mode
00: To LowPowerSelection
1: To Idle state
0: To Transmit state on T1 interrupt
0: To LowPowerSelection on PacketSent interrupt
T_{Timer1 +} T_Timer2 define the time between the start of two transmissions.
Page 120
Tel: [phone] Fax: [phone] E-mail: [e-mail] http://www.hoperf.com