NUC920ABN Datasheet, PDF (304/529 Pages) Nuvoton Technology Corporation – 32-BIT ARM926EJ-S BASED MCU

NUC920ABN
32-BIT ARM926EJ-S BASED MCU
SD1 Card Detection Interrupt Enable
Enable/Disable interrupt generation of SD controller when card 1 is inserted
[9]
CD1_IE
or removed.
0 = Disable.
1 = Enable.
CRC-7, CRC-16 and CRC Status Error Interrupt Enable
0 = SD host will not generate interrupt when CRC-7, CRC-16 and CRC
[1]
CRC_IE
status is error.
1 = SD host will generate interrupt when CRC-7, CRC-16 and CRC status is
error.
Block Transfer Done Interrupt Enable
[0]
BLKD_IE
0 = SD host will not generate interrupt when data-in (out) transfer done.
1 = SD host will generate interrupt when data-in (out) transfer done.
Publication Release Date: Jun. 18, 2010
304
Revision: A3