RHFAC244D03V Datasheet, PDF (26/27 Pages) List of Unclassifed Manufacturers – DLA LAND AND MARITIME COLUMBUS, OHIO 43218-3990

STANDARD MICROCIRCUIT DRAWING BULLETIN
DATE: 12-07-25
Approved sources of supply for SMD 5962-87552 are listed below for immediate acquisition information only and
shall be added to MIL-HDBK-103 and QML-38535 during the next revision. MIL-HDBK-103 and QML-38535 will be
revised to include the addition or deletion of sources. The vendors listed below have agreed to this drawing and a
certificate of compliance has been submitted to and accepted by DLA Land and Maritime -VA. This information
bulletin is superseded by the next dated revision of MIL-HDBK-103 and QML-38535. DLA Land and Maritime
maintains an online database of all current sources of supply at http://www.landandmaritime.dla.mil/Programs/Smcr/.
Standard
microcircuit drawing
PIN 1/
5962-8755201RA
5962-8755201SA
5962-87552012A
5962-8755201ZA
5962-8755201VRA
5962-8755201VSA
5962-8755201XA
5962-8755201XC
5962-8755201VXA
5962-8755201VXC
5962F8755201XA
5962F8755201XC
5962F8755201VXC
5962F8755201VXA
5962F8755201RA
5962F8755201RC
5962F8755201VRA
5962F8755201VRC
5962F8755201V9A
5962-8755202JA
5962-8755202KA
5962-8755202LA
5962-87552023A
Vendor
CAGE
number
01295
0C7V7
01295
0C7V7
01295
0C7V7
0C7V7
01295
01295
3/
3/
3/
3/
F8859
F8859
F8859
F8859
F8859
F8859
F8859
F8859
F8859
3/
3/
3/
3/
Vendor
similar
PIN 2/
SNJ54AC244J
54AC244DMQB
SNJ54AC244W
54AC244FMQB
SNJ54AC244FK
54AC244LMQB
54AC244WG-QML
SNV54AC244J
SNV54AC244W
54AC244K02Q
54AC244K01Q
54AC244K02V
54AC244K01V
RHFAC244K02Q
RHFAC244K01Q
RHFAC244K01V
RHFAC244K02V
RHFAC244D04Q
RHFAC244D03Q
RHFAC244D04V
RHFAC244D03V
AC244DIE2V
54AC11244
54AC11244
54AC11244
54AC11244
1/ The lead finish shown for each PIN representing
a hermetic package is the most readily available
from the manufacturer listed for that part. If the
desired lead finish is not listed contact the vendor
to determine its availability.
2/ Caution. Do not use this number for item
acquisition. Items acquired to this number may not
satisfy the performance requirements of this drawing.
3/ Not available from an approved source of supply.
Sheet 1 of 2