M0100-103-3-000 Datasheet, PDF (2/16 Pages) List of Unclassifed Manufacturers – 400W AC Powered Servo Drive

SVAC3
400W AC Powered Servo Drive
• Operates from 120 or 220 VAC
• Digital PID servo control
• Velocity and acceleration feedforward
minimize position error throughout
every move
• Digital DQ current loop provides wide
bandwidth, precise current control
• Sine commutation for smooth, quiet
motion
• PID output filter + derivative filter
eliminate system resonances
• Jerk filter provides jerk free “S curve”
motion
• Built-in regeneration (power dump)
circuit
• 100 Mbit Ethernet
• Flexible control options
• Q Programmable™ version
C
C_C ontrol
Options*
C
IP IP IP ▪ Pulse & direction
▪ CW/CCW pulse
▪ A/B quadrature
▪ Velocity (oscillator) mode
▪ Analog +/-10V torque, velocity, position
CC
▪ Host commands (SCL)
C ▪ Quick Tuner^TM software for setup
IP IP
IP _{▪ Stand-alone operation}
▪ Q Programmer^TM for complex motion
▪ Quick Tuner^TM software for setup
▪ Conditional processing
▪ Math functions
▪ Multi-tasking
▪ Register manipulation
▪ Encoder following
▪ Third-party HMI compatibility
CC
IP IP
C _{▪ EtherNet/IP}
IP ^{▪ Connects to industry’s most popular PLC’s}
▪ Same functions as Q model
*See back page for complete list of available model numbers.
For more information, visit:
www.applied-motion.com/SVAC3
Communications
Ethernet Port
▪ The Ethernet port on all SVAC3 drives is used for configuration,
programming, and streaming SCL and Q commands to one
or more drives across 100 Mbit Ethernet networks (TCP and
UDP).
EtherNet/IP option: SV7-IP-EE
▪ Allows drives to be commanded and queried over EtherNet/IP
industrial networks.
2