M0100-103-3-000 Datasheet, PDF (15/16 Pages) List of Unclassifed Manufacturers – 400W AC Powered Servo Drive

Accessories
Power Supplies
Applied Motion offers two matched
power supplies for use with the
SV7 drives. A 24VDC 150W (part
number: PS150A24) and a 48VDC
320W version (part number:
PS320A48). These power supplies
have current over load capability
making them ideal for use with
servo drives.
Break Out Boards: BOB-1 and BOB-2
BOB-1 is for use with all drives and expands the
DB25F connector to screw terminals. BOB-2
is for use with the DB25M connector on the
BLuAC5-Si and -QE. A 3 foot cable included with
both models.
RC-050 Regeneration
Clamp (for SV7)
The RC-050 regeneration
clamp is for use where
regeneration from the
motor may be excessive
for the power supply. In
these cases, the RC-050
is connected between the
drive and power supply and absorbs regenerated energy.
Braking resistor assembly - RA-100
For use with BLuAC5 dynamic braking and regeneration circuits.
15