|
RHFAC14K01V Datasheet, PDF (12/24 Pages) List of Unclassifed Manufacturers – STANDARD MICROCIRCUIT DRAWING | |||
|
◁ |
NOTES:
1. CL = 50 pF minimum or equivalent (includes probe and jig capacitance).
2. RL = 500⦠or equivalent.
3. Input signal from pulse generator: VIN = 0.0 V to VCC; PRR ⤠1 MHz; ZO = 50â¦; tr ⤠3.0 ns; tf ⤠3.0 ns; tr and tf shall be
measured from 10% of VCC to 90% of VCC and from 90% of VCC to 10% of VCC, respectively; duty cycle = 50 percent.
4. Timing parameters shall be tested at a minimum input frequency of 1MHz.
5. The outputs are measured one at a time with one transition per measurement.
FIGURE 4. Switching waveforms and test circuit.
STANDARD
MICROCIRCUIT DRAWING
DEFENSE SUPPLY CENTER COLUMBUS
COLUMBUS, OHIO 43218-3990
DSCC FORM 2234
APR 97
SIZE
A
REVISION LEVEL
B
5962-87624
SHEET
12
|
▷ |