|
M052LDN Datasheet, PDF (10/86 Pages) List of Unclassifed Manufacturers – 32-bit Microcontroller | |||
|
◁ |
M051 DN/DE
ï¬ I2C
ï® Up to two sets of I2C modules
ï® Supports Master/Slave mode
ï® Bidirectional data transfer between master and slave
ï® Multi-master bus (no central master)
ï® Arbitration between simultaneously transmitting masters without corruption of serial
data on the bus
ï® Serial clock synchronization allows devices with different bit rates to communicate via
one serial bus
ï® Serial clock synchronization can be used as a handshake mechanism to suspend and
resume serial transfer
ï® Programmable clocks allow versatile rate control
ï® Supports multiple address recognition (four slave addresses with mask option)
ï¬ ADC
ï® 12-bit SAR ADC
ï® Up to 8-ch single-ended input or 4-ch differential input
ï® Supports Single mode/Burst mode/Single-cycle Scan mode/Continuous Scan mode
ï® Supports 2â complement/un-signed format in differential mode conversion results
ï® Each channel with an individual result register
ï® Supports conversion value monitoring (or comparison) for threshold voltage detection
ï® Conversion started either by software trigger or external pin trigger
ï® A/D conversion started by PWM center-aligned trigger or edge-aligned trigger
ï® PWM trigger delay function
ï® Supports conversion result with signed format in Differential input and Burst mode
ï¬ Analog Comparator
ï® Up to four sets of Comparator analog modules
ï® External input or internal band-gap voltage selectable at negative node
ï® Interrupt when compared results change
ï® Power-down wake-up
ï¬ EBI (External Bus Interface) for external memory-mapped device access
ï® Accessible space: 64 KB in 8-bit mode or 128 KB in 16-bit mode
ï® Supports 8-bit or 16-bit data width
ï® Supports byte-write in 16-bit data width
ï¬ ISP (In-System Programming) and ICP (In-Circuit Programming)
ï¬ IAP (In-Application Programming)
ï¬ One built-in temperature sensor with 1â resolution
ï¬ BOD (Brown-out Detector)
ï® With 4 levels: 4.4V/3.7V/2.7V/2.2V
ï® Supports Brown-out interrupt and reset option
ï¬ 96-bit unique ID
ï¬ LVR (Low Voltage Reset)
ï® Threshold voltage level: 2.0V
ï¬ Operating Temperature:
Oct. 05, 2015
Page 10 of 86
Rev 1.03
|
▷ |