EPC1064V Datasheet, PDF (29/36 Pages) List of Unclassifed Manufacturers – Configuration Devices for SRAM-Based LUT Devices

Operating
Conditions
Configuration Devices for SRAM-Based LUT Devices Data Sheet
Figure 10. EPC2 JTAG Waveforms
TMS
TDI
TCK
TDO
Signal
to Be
Captured
Signal
to Be
Driven
t_JCH
t_JCP
t_JCL
t_JPSU
t_JPZX
t_JSSU
t_JSZX
t_JPCO
t_JSH
t_JSCO
t_JPH
t_JPXZ
t_JSXZ
Table 11 shows the timing parameters and values for configuration
devices.
Table 11. JTAG Timing Parameters & Values
Symbol
Parameter
t_JCP
t_JCH
t_JCL
t_JPSU
t_JPH
t_JPCO
t_JPZX
t_JPXZ
t_JSSU
t_JSH
t_JSCO
t_JSZX
t_JSXZ
TCK clock period
TCK clock high time
TCK clock low time
JTAG port setup time
JTAG port hold time
JTAG port clock to output
JTAG port high impedance to valid output
JTAG port valid output to high impedance
Capture register setup time
Capture register hold time
Update register clock to output
Update register high-impedance to valid output
Update register valid output to high impedance
Min Max Unit
100
ns
50
ns
50
ns
20
ns
45
ns
25 ns
25 ns
25 ns
20
ns
45
ns
25 ns
25 ns
25 ns
Tables 12 through 19 provide information on absolute maximum ratings,
recommended operating conditions, DC operating conditions, and
capacitance for configuration devices.
Altera Corporation
29