|
ICM320T Datasheet, PDF (18/30 Pages) List of Unclassifed Manufacturers – 3.2 Megapixel QXGA Digital Color CMOS Image Sensor | |||
|
◁ |
ICM320T
3.2 Megapixel QXGA Digital Color CMOS VGA Image Sensor
Preliminary Data Sheet V1.0
Table 2. SIF Registers Descriptions (continued)
Bit Description
Default
0x51 DEAD PIXEL AND AVERAGING FILTER CONTROL
[0]: Column average for 1/4-rate subsampling (2-point
0x00
average)
1: Enable
0: Disable
[1]: Column average for 1/16-rate subsampling (4-point
average)
1: Enable
0: Disable
[2]: Row average for both sub-sampling modes
1: Enable
0: Disable
[3]: Dead pixel filter for sub-sampling mode
1: Enable
0: Disable
0x52 OUTPUT FORMAT CONTROL
[3:0] Global digital gain
0x00
0x0: 1x gain (default)
0x1: 2x gain
0x2: 4x gain
0x3: 8x gain
Others: 1x gain
[7:4] Output format
0x0: Normal mode (default)
0x1: Reserved.
0x2: 1/16-rate subsampling mode (1024x768 format)
0x3: 1/4-rate subsampling mode (512x384 format)
0x4: Control signal
0x5: Sensor row
0x6: Sensor column
Others: Normal mode
0x53 to 0x81
Reserved.
0x82 DEVICE ID
0x83 DEVICE ID
[3:0] Sub ID. Can be configured using SIF
0xB100
[15:4] Device ID, default 0xB10. Can be configured using
(45312)
SIF.
0x84 FLASH START POSITION (LSB)
0x85 FLASH START POSITION (MSB)
[15:0] Flash begin position in terms of rows.
0x0614
(1556)
Affected by
Latent
Register
Frame
Boundary
Update
N
Y
N
Y
N
N
N
Y
Copyright 2005, IC Media Corporation
http://www.ic-media.com/
Page 18
3/14/2005
|
▷ |