ICM320T Datasheet, PDF (13/30 Pages) List of Unclassifed Manufacturers – 3.2 Megapixel QXGA Digital Color CMOS Image Sensor

ICM320T
3.2 Megapixel QXGA Digital Color CMOS VGA Image Sensor
Preliminary Data Sheet V1.0
SIF Registers
Table 2. SIF Registers Descriptions (continued)
Bit Description
Default
0x00 PART CONTROL
Processing control
[0] 0: Normal mode. 1: Single frame mode.
0x00
[1] Slope adjustment enable
[2] Exposure time control. Writing a ‘1’ will activate the new
value set in 0x1C and 0x1D, when read back from it. A ‘0’
means that the exposure time change is finished. A ‘1’ means
that the exposure time change is still in progress.
[6:3] Frame rate for different ADC clock frequencies.
Value
0x0
0x1
0x2
0x3
0x4
0x5
0x6
0x7
ADC clock frequency
48 MHz
96 MHz 128 MHz
6 fps
12 fps
16 fps
3 fps
6 fps
8 fps
2 fps
4 fps
5 fps
1 fps
2 fps
2.3 fps
0.85 fps
1.7 fps
1.9 fps
0.6 fps
1.2 fps
1.0 fps
0.4 fps
0.8 fps
0.5 fps
0.2 fps
0.4 fps
[7] Latent change. Writing a ‘1’ means that the changed latent
registers now start taking effect. When the entire operation
is done, the read back value of this bit will change from
‘1’ to ‘0’.
Affected by
Latent
Register
Frame
Boundary
Update
Y
Y
Copyright 2005, IC Media Corporation
http://www.ic-media.com/
Page 13
3/14/2005