GD25Q80 Datasheet, PDF (43/49 Pages) ELM Electronics – 3.3V Uniform Sector Dual and Quad Serial Flash

GD25Q80CxIGx 3.3V Uniform Sector Dual and Quad Serial Flash
8.6. DC Characteristics
Symbol
Parameter
Test Condition
http://www.elm-tech.com
(T= -40°C~85°C, VCC=2.7~3.6V)
Min. Typ. Max. Unit.
ILI Input Leakage Current
±2
μA
ILO Output Leakage Current
±2
μA
ICC1 Standby Current
CS#=VCC, VIN=VCC or VSS
1
5
μA
ICC2 Deep Power-Down Current CS#=VCC, VIN=VCC or VSS
1
5
μA
ICC3 Operating Current (Read)
CLK=0.1VCC/0.9VCC at 120MHz,
Q=Open(*1,*2,*4 I/O)
CLK=0.1VCC/0.9VCC at 80MHz,
Q=Open(*1,*2,*4 I/O)
15 20 mA
13 18 mA
ICC4 Operating Current (PP)
CS#=VCC
20 mA
ICC5 Operating Current (WRSR) CS#=VCC
20 mA
ICC6 Operating Current (SE)
CS#=VCC
20 mA
ICC7 Operating Current (BE)
CS#=VCC
20 mA
ICC8 Operating Current (CE)
CS#=VCC
20 mA
ICC9 High Performance Current
400 800 μA
VIL Input Low Voltage
0.2VCC V
VIH Input High Voltage
0.7VCC
V
VOL Output Low Voltage
IOL=100μA
0.2
V
VOH Output High Voltage
IOH=-100μA
VCC-0.2
V
8.7. AC Characteristics
Symbol
Parameter
(T= -40°C~85°C, VCC=2.7~3.6V, CL=30pf)
Min. Typ. Max. Unit.
Serial Clock Frequency For:
fC
Dual I/O(BBH), Quad I/O(EBH), Quad Output(6BH) (Dual I/O
& Quad I/O Without High Performance Mode), on 3.0V-3.6V
DC.
power supply
Serial Clock Frequency For:
fC1
Dual I/O(BBH), Quad I/O(EBH), Quad Output(6BH) (Dual I/O
& Quad I/O Without High Performance Mode), on 2.7V-3.0V
DC.
power supply
Serial Clock Frequency For:
fC2
Dual I/O(BBH), Quad I/O(EBH), Quad Output(6BH) (Dual I/O
& Quad I/O With High Performance Mode), on 2.7V-3.6V power
DC.
supply
fR Serial Clock Frequency For: Read (03H)
DC.
tCLH Serial Clock High Time
4
tCLL Serial Clock Low Time
4
tCLCH Serial Clock Rise Time (Slew Rate)
0.2
tCHCL Serial Clock Fall Time (Slew Rate)
0.2
104 MHz
80 MHz
120 MHz
80 MHz
ns
ns
V/ns
V/ns
49 - 43
Rev.1.0