GD25D10 Datasheet, PDF (4/28 Pages) ELM Electronics – Uniform sector dual and quad serial flash

GD25D10BxIGx Uniform sector dual and quad serial flash
1. FEATURES
http://www.elm-tech.com
♦ 1M-bit Serial Flash
♦ Program/Erase Speed
- 128K/64K-byte
- 256 bytes per programmable page
♦ Standard, Dual Output
- Standard SPI: SCLK, CS#, SI, SO, WP#
- Dual Output: SCLK, CS#, IO0, O1, WP#
♦ Clock Frequency
- 80MHz for fast read with 30PF load
- Dual Output Data transfer up to 160Mbits/s
♦ Software/Hardware Write Protection
- Write protect all/portion of memory via software
- Enable/Disable protection with WP# pin
♦ Cycling endurance
- Minimum 100,000 Program/Erase cycles
♦ Data retention
- 20-year data retention typical
- Page Program time: 0.7ms typical
- Sector Erase time: 40ms typical
- Block Erase time: 0.2/0.4s typical
- Chip Erase time: 0.8/0.4s typical
♦ Flexible Architecture
- Sector of 4K-byte
- Block of 32/64K-byte
♦ Low Power Consumption
- 18mA maximum active current
- 5μA maximum power down current
♦ Single Power Supply Voltage
- Full voltage range: 2.7~3.6V
♦ Package option
- SOP8 150MIL
- USON8 3x2mm
28 - 4
Rev.1.0