English
Language : 

MTD011N10RH8 Datasheet, PDF (2/10 Pages) Cystech Electonics Corp. – N-Channel Enhancement Mode Power MOSFET
CYStech Electronics Corp.
Spec. No. : C169H8
Issued Date : 2015.11.23
Revised Date : 2016.04.27
Page No. : 2/10
Absolute Maximum Ratings (Ta=25C)
Parameter
Drain-Source Voltage
Gate-Source Voltage
Continuous Drain Current @ TC=25C, VGS=10V (Note 1)
Continuous Drain Current @ TC=100C, VGS=10V (Note 1)
Continuous Drain Current @ TA=25C, VGS=10V (Note 2)
Continuous Drain Current @ TA=70C, VGS=10V (Note 2)
Continuous Drain Current @ TA=85C, VGS=10V (Note 2)
Pulsed Drain Current
(Note 3)
Avalanche Current
(Note 3)
Avalanche Energy @ L=0.5mH, ID=33A, VDD=50V (Note 2, 4)
Repetitive Avalanche Energy @ L=0.05mH
(Note 3)
TC=25℃
(Note 1)
TC=100℃ (Note 1)
Total Power Dissipation
TA=25C (Note 2)
TA=70C (Note 2)
TA=85C (Note 2)
Operating Junction and Storage Temperature Range
Symbol
VDS
VGS
ID
IDSM
IDM
IAS
EAS
EAR
PD
PDSM
Tj, Tstg
10s Steady State Unit
100
±20
V
45
28
15
10
12
8
A
10.8
7.2
180 *1
40
272
mJ
5 *2
50
20
5.7
2.5
W
4.0
1.8
3.6
1.6
-55~+150
C
Thermal Data
Parameter
Thermal Resistance, Junction-to-ambient
(Note 2)
Thermal Resistance, Junction-to-case
t≤10s
Steady State
Symbol
RθJA
RθJC
Typical
18
42
2.2
Maximum
22
50
2.5
Unit
C/W
Note : 1.The power dissipation PD is based on TJ(MAX)=150°C, using junction-to-case thermal resistance, and is more useful
in setting the upper dissipation limit for cases where additional heatsinking is used.
2.The value of RθJA is measured with the device mounted on 1 in²FR-4 board with 2 oz. copper, in a still air
environment with TA=25°C. The power dissipation PDSM is based on RθJA and the maximum allowed junction
temperature of 150°C. The value in any given application depends on the user’s specific board design.
3.Repetitive rating, pulse width limited by junction temperature TJ(MAX)=150°C. Ratings are based on low frequency
and low duty cycles to keep initial TJ=25°C.
4.100% tested by conditions of L=0.5mH, IAS=20A, VGS=10V, VDD=50V
MTD011N10RH8
CYStek Product Specification