English
Language : 

BCM4356XKUBGT Datasheet, PDF (137/195 Pages) Cypress Semiconductor – Single-Chip 5G WiFi IEEE 802.11ac 2×2 MAC/ Baseband/Radio with Integrated Bluetooth 4.1, FM Receiver, and Wireless Charging
BCM4356 Advance Data Sheet
Bluetooth RF Specifications
Table 36: BLE RF Specifications
Parameter
Conditions
Minimum Typical Maximum Unit
Frequency range
–
RX sensea
GFSK, 0.1% BER, 1 Mbps
TX powerb
–
Mod Char: delta F1 average –
Mod Char: delta F2 max.c –
Mod Char: ratio
–
2402
–
–
225
99.9
0.8
–95.5
8.5
255
–
0.95
2480
–
–
275
–
–
MHz
dBm
dBm
kHz
%
%
a. Dirty TX is On.
b. BLE TX power can be increased to compensate for front-end losses such as BPF, diplexer, switch, etc.). The
output is capped at 12 dBm out. The BLE TX power at the antenna port cannot exceed the 10 dBm specification
limit.
c. At least 99.9% of all delta F2 max. frequency values recorded over 10 packets must be greater than 185 kHz.
Broadcom®
May 8, 2015 • 4356-DS103-R
BROADCOM CONFIDENTIAL
Page 136