English
Language : 

CDB53L21 Datasheet, PDF (8/33 Pages) Cirrus Logic – Evaluation Board for CS53L21
CDB53L21
2.1 General Configuration Tab
The “General Configuration” tab provides high-level control of signal routing on the CDB53L21. This tab also
includes basic controls for the CS53L21 for quickly setting up the CDB53L21 in simple configurations. Sta-
tus text detailing the ADC’s specific configuration is shown in parenthesis or appears directly below the as-
sociated control. This text may change depending on the setting of the associated control. A description of
each control group is outlined below:
ADC Basic Configuration - Includes basic register controls in the CS53L21 used for setting up the interface
format, clocking functions and internal analog input routing. See Section 2.2 through Section 2.4 for more
CS53L21 controls.
S/PDIF Transmitter Control - Includes all available Hardware Mode controls for setting up the CS8406.
Clock/Data Routing and ADC Reset - Includes controls used for routing clocks and data between the
CS53L21, oscillator and the I/O stake header. Also included is a reset control for the CS53L21.
Update - Reads all registers in the FPGA and CS53L21 and reflects the current values in the GUI.
Reset - Resets FPGA to default routing configuration.
Figure 1. General Configuration Tab
8
DS700DB1