CS42448_07 Datasheet, PDF (6/64 Pages) Cirrus Logic – 108 dB, 192 kHz 6-In, 8-Out CODEC

1. PIN DESCRIPTIONS
CS42448
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
AD0/CS 1
AD1/CDIN 2
RST 3
VLC 4
ADC_LRCK 5
VD 6
DGND 7
VLS 8
ADC_SCLK 9
MCLK 10
ADC_SDOUT3 11
ADC_SDOUT2 12
ADC_SDOUT1 13
DAC_SDIN4 14
DAC_SDIN3 15
DAC_SDIN2 16
CS42448
48 AIN2+
47 AIN2-
46 AIN1+
45 AIN1-
44 VA
43 VQ
42 AGND
41 AOUT8-
40 AOUT8+
39 AOUT7+
38 AOUT7-
37 AOUT6-
36 AOUT6+
35 MUTEC
34 AOUT5+
33 AOUT5-
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Pin Name
AD0/CS
AD1/CDIN
RST
VLC
ADC_LRCK
VD
DGND
VLS
ADC_SCLK
MCLK
ADC_SDOUT1
ADC_SDOUT2
ADC_SDOUT3
#
Pin Description
1
Address Bit [0]/ Chip Select (Input) - Chip address bit in I²C Mode. Control signal used to select
the chip in SPI Mode.
2 Address Bit [1]/ SPI Data Input (Input) - Chip address bit in I²C Mode. Input for SPI data.
3
Reset (Input) - The device enters a low power mode and all internal registers are reset to their
default settings when low.
4
Control Port Power (Input) - Determines the required signal level for the control port. See “Digital
I/O Pin Characteristics” on page 8.
ADC Left/Right Clock (Input/Output) - Determines which channel, Left or Right, is currently
5 active on the ADC serial audio data line. Signals the start of a new TDM frame in the TDM digital
interface format.
6, 24 Digital Power (Input) - Positive terminal of the power supply for the digital section.
7, 23,
62
Digital Ground (Input) - Ground terminal of the power supply for the digital section.
8
Serial Port Interface Power (Input) - Determines the required signal level for the serial inter-
faces. See “Digital I/O Pin Characteristics” on page 8.
9
ADC Serial Clock (Input/Output) - Serial clock for the ADC serial audio interface. Input frequency
must be 256xFs in the TDM digital interface format.
10 Master Clock (Input) - Clock source for the delta-sigma modulators and digital filters.
13
12 Serial Audio Data Output (Output) - Outputs for two’s complement serial audio data.
11
6
DS648F3