HCPL-2533 Datasheet, PDF (5/11 Pages) AVAGO TECHNOLOGIES LIMITED – LSTTL compatible

IEC/EN/DIN EN 60747-5-2 Insulation Characteristics (Option 060)
Description
Installation classification per DIN VDE 0110/1.89, Table 1
  for rated mains voltage ≤ 150 V rms
for rated mains voltage ≤ 300 V rms
for rated mains voltage ≤ 600 V rms
Climatic Classification
Pollution Degree (DIN VDE 0110/1.89)
Maximum Working Insulation Voltage
Input to Output Test Voltage, Method b*
V_IORM x 1.875 = V_PR, 100% Production Test
with t_m = 1 sec, Partial Discharge < 5 pC
Input to Output Test Voltage, Method a*
V_IORM x 1.5 = V_PR, Type and Sample Test,
t_m = 60 sec, Partial Discharge < 5 pC
Highest Allowable Overvoltage
(Transient Overvoltage, t_ini = 10 sec)
Safety Limiting Values
(Maximum values allowed in the event of a failure.)
Case Temperature
Input Current**
Output Power**
Insulation Resistance at T_S, V_IO = 500 V
Symbol
V_IORM
V_PR
V_PR
V_IOTM
T_S
I_S,INPUT
P_S,OUTPUT
R_S
Characteristic
HCPL-2533
I-IV
I-III
55/100/21
2
630
1181
945
6000
175
230
600
> 10⁹
Unit
V_peak
V_peak
V_peak
V_peak
°C
mA
mW
Ω
* Refer to the optocoupler section of the Isolation and Control Components Designer's Catalog, under Product Safety Regulations section,
IEC/EN/DIN EN 60747-5-2, for a detailed description of Method a and Method b partial discharge test profiles.
** Refer to the following figure for dependence of P_S and I_S on ambient temperature.
Note: Isolation characteristics are guaranteed only within the safety maximum ratings, which must be ensured by protective circuits in application.
800
700
P_S (mW)
I_S (mA)
600
500
400
300
200
100
0
0 25 50 75 100 125 150 175 200
T_S – CASE TEMPERATURE – °C