HCPL-2533 Datasheet, PDF (1/11 Pages) AVAGO TECHNOLOGIES LIMITED – LSTTL compatible

HCPL-2533
Dual Channel, High Speed Logic Interface Optocoupler
Data Sheet
Lead (Pb) Free
RoHS 6 fully
compliant
RoHS 6 fully compliant options available;
-xxxE denotes a lead-free product
Description
The HCPL-2533 is a dual channel optocoupler which is
specified for use in LSTTL-to-LSTTL and TTL-to-LSTTL
logic interfaces. A nominal 8 mA LSTTL sink current
through the input LED will provide enough output
current for proper operation of 1 LSTTL gate under
worst-case conditions when used in the recommended
circuits. The CTR of the HCPL-2533 is 15% minimum at
I_F = 8 mA.
The HCPL-2533 contains a pair of light emitting diodes
and integrated photon detectors with a 3000 Vdc
withstand test between input and output. Separate
connection for the photodiode bias and output tran-
sistor collector reduce the base-collector capacitance,
giving improved speed compared with conventional
phototransistor couplers.
Schematic
1 I_F1
+
V_F1
-
2
I_CC
V_CC
8
I _O1
V_O1
7
Features
• Data rates to 250 kb/s NRZ
• LSTTL compatible
• High common mode transient immunity:
> 1000 V/µs
• High density packaging
• Open collection outputs
• Guaranteed performance from temperature:
0°C to 70°C
• Safety approval
- UL Recognized - 3750V_rms for 1min (5000V_rms for
1 min Option 020 devices) per UL1577.
- IEC/EN/DIN EN 60747-5-2 Approved
- V_IORM = 630 V_peak for option 060
Applications
• High speed logic ground isolation
– LSTTL-to-LSTTL and TTL-to-LSTTL
• High voltage isolation
• Analog signal ground isolation
3
I_F2
-
V_F2
I _O2
V_O2
6
+
4
GND
5
SHIELD
USE OF A 0.1 µF BYPASS CAPACITOR CONNECTED
BETWEEN PINS 5 AND 8 IS RECOMMENDED.
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.