HCPL-2533 Datasheet, PDF (2/11 Pages) AVAGO TECHNOLOGIES LIMITED – LSTTL compatible

Ordering Information
HCPL-2533 is UL Recognized with 3750 Vrms and 5000 Vrms (Option 020) for 1 minute per UL1577 and are approved
under CSA Component Acceptance Notice #5, File CA 88324.
Option
Part
number
RoHS Non RoHS
Surface Gull Tape UL 5000 Vrms/ IEC/EN/DIN
Compliant Compliant Package Mount Wing & Reel 1 Minute rating EN 60747-5-2 Quantity
-000E
No option
50 per tube
-300E
-300
X
X
50 per tube
-500E
-500
X
X
X
1000 per reel
-020E
-020
X
HCPL-2533
-320E
-320
300mil
DIP-8
X
X
X
-520E
-520
X
X
X
X
50 per tube
50 per tube
1000 per reel
-060E
-060
X
50 per tube
-360E
-360
X
X
X
50 per tube
-560E
-560
X
X
X
X
1000 per reel
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
HCPL-2533-500E to order product of 300mil DIP Gull Wing Surface Mount package in Tape and Reel packag-
ing with RoHS compliant.
Example 2:
HCPL-2533 to order product of 300mil DIP package in tube packaging and non RoHS compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
Remarks: The notation ‘#XXX’ is used for existing products, while (new) products launched since 15th July 2001 and
RoHS compliant option will use ‘-XXXE‘.
Absolute Maximum Ratings
Storage Temperature.......................................................................................................................................................... –55°C to +125°C
Operating Temperature .................................................................................................................................................... –55°C to +100°C
Lead Solder Temperature (1.6 mm below seating plane) .......................................................................................... 260°C for 10 s
Average Input Current – I_F (each channel)..................................................................................................................................25 mA^[1]
Peak Input Current – I_F (each channel) (50% duty cycle, 1 ms pulse width) ..................................................................50 mA^[2]
Peak Transient Input Current – I_F (each channel) (≤1 µs pulse width, 300 pps).................................................................... 1.0 A
Reverse Input Voltage – V_R (each channel).............................................................................................................................................5 V
Input Power Dissipation (each channel)......................................................................................................................................45 mW^[3]
Average Output Current – I_O (each channel).....................................................................................................................................8 mA
Peak Output Current – I_O (each channel).........................................................................................................................................16 mA
Supply and Output Voltage – V_CC (Pin 8-5), V_O (Pin 7, 6-5).............................................................................................–0.5 V to 7 V
Output Power Dissipation (each channel)..................................................................................................................................35 mW^[4]
Notes:
1.  Derate linearly above +70˚C free-air temperature at a rate of 0.8 mA/˚C.
2.  Derate linearly above +70˚C free-air temperature at a rate of 1.6 mA/˚C.
3.  Derate linearly above +70˚C free-air temperature at a rate of 0.9 mW/˚C.
4.  Derate linearly above +70˚C free-air temperature at a rate of 1.0 mW/˚C.