AT32UC3A3256S_1 Datasheet, PDF (478/961 Pages) ATMEL Corporation – AVR32 32-Bit Microcontroller

AT32UC3A3
Write this bit to one if the command in CMDR performs a repeated start to the same slave address as addressed in the previous
transfer in order to enter master receiver mode.
Write this bit to zero otherwise.
• TENBIT: Ten Bit Addressing Mode
Write this bit to zero to use 7-bit addressing mode.
Write this bit to one to use 10-bit addressing mode. Must not be used when TWIM is in SMBus mode.
• SADR: Slave Address
Address of the slave involved in the transfer. Bits 9-7 are don’t care if 7-bit addressing is used.
• READ: Transfer Direction
Write this bit to zero to let the master transmit data.
Write this bit to one to let the master receive data.
32072A–AVR32–03/09
478