English
Language : 

AT32UC3L064_1 Datasheet, PDF (1/825 Pages) ATMEL Corporation – AVR32 32-bit Microcontroller
Features
• High Performance, Low Power AVR®32 UC 32-bit Microcontroller
– Compact Single-Cycle RISC Instruction Set Including DSP Instructions
– Read-Modify-Write Instructions and Atomic Bit Manipulation
– Performance
• Up to 64 DMIPS Running at 50MHz from Flash (1 Flash Wait State)
• Up to 36 DMIPS Running at 25MHz from Flash (0 Flash Wait State)
– Memory Protection Unit
• picoPower™ Technology for Ultra-Low Power Consumption
• Multi-Hierarchy Bus System
– High-Performance Data Transfers on Separate Buses for Increased Performance
– 12 Peripheral DMA Channels Improve Speed for Peripheral Communication
• Internal High-Speed Flash
– 64Kbytes, 32Kbytes, and 16Kbytes Versions
– Single-Cycle Access up to 25MHz
– FlashVault™ Technology Allows Pre-programmed Secure Library Support for End
User Applications
– Prefetch Buffer Optimizing Instruction Execution at Maximum Speed
– 4ms Page Programming Time and 8ms Full-Chip Erase Time
– 100,000 Write Cycles, 15-year Data Retention Capability
– Flash Security Locks and User Defined Configuration Area
• Internal High-Speed SRAM, Single-Cycle Access at Full Speed
– 16Kbytes (64Kbytes and 32Kbytes Flash), or 8Kbytes (16Kbytes Flash)
• Interrupt Controller (INTC)
– Autovectored Low Latency Interrupt Service with Programmable Priority
• External Interrupt Controller (EIC)
• Peripheral Event System for Direct Peripheral to Peripheral Communication
• System Functions
– Power and Clock Manager
– SleepWalking™ Power Saving Control
– Internal System RC Oscillator (RCSYS)
– 32 KHz Oscillator
– Multipurpose Oscillator and Digital Frequency Locked Loop (DFLL)
• Windowed Watchdog Timer (WDT)
• Asynchronous Timer (AST) with Real-Time Clock Capability
– Counter or Calendar Mode Supported
• Frequency Meter (FREQM) for Accurate Measuring of Clock Frequency
• Six 16-bit Timer/Counter (TC) Channels
– External Clock Inputs, PWM, Capture and Various Counting Capabilities
• PWM Channels on All I/O Pins (PWMA)
– 8-bit PWM up to 150MHz Source Clock
• Four Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
– Independent Baudrate Generator, Support for SPI
– Support for Hardware Handshaking
• One Master/Slave Serial Peripheral Interfaces (SPI) with Chip Select Signals
– Up to 15 SPI Slaves can be Addressed
• Two Master and Two Slave Two-Wire Interfaces (TWI), 400kbit/s I2C-compatible
• One 9-channel Analog-To-Digital Converter (ADC) with up to 12 Bits Resolution
– Internal Temperature Sensor
AVR®32
32-bit
Microcontroller
AT32UC3L064
AT32UC3L032
AT32UC3L016
Preliminary
32099A–AVR32–06/09