English
Language : 

AT32AP7000_1 Datasheet, PDF (1/973 Pages) ATMEL Corporation – AVR32 32-bit Microcontroller
Features
• High Performance, Low Power AVR®32 32-Bit Microcontroller
– 210 DMIPS throughput at 150 MHz
– 16 KB instruction cache and 16 KB data caches
– Memory Management Unit enabling use of operating systems
– Single-cycle RISC instruction set including SIMD and DSP instructions
– Java Hardware Acceleration
• Pixel Co-Processor
– Pixel Co-Processor for video acceleration through color-space conversion
(YUV<->RGB), image scaling and filtering, quarter pixel motion compensation
• Multi-hierarchy bus system
– High-performance data transfers on separate buses for increased performance
• Data Memories
– 32KBytes SRAM
• External Memory Interface
– SDRAM, DataFlash™, SRAM, Multi Media Card (MMC), Secure Digital (SD),
– Compact Flash, Smart Media, NAND Flash
• Direct Memory Access Controller
– External Memory access without CPU intervention
• Interrupt Controller
– Individually maskable Interrupts
– Each interrupt request has a programmable priority and autovector address
• System Functions
– Power and Clock Manager
– Crystal Oscillator with Phase-Lock-Loop (PLL)
– Watchdog Timer
– Real-time Clock
• 6 Multifunction timer/counters
– Three external clock inputs, I/O pins, PWM, capture and various counting
capabilities
• 4 Universal Synchronous/Asynchronous Receiver/Transmitters (USART)
– 115.2 kbps IrDA Modulation and Demodulation
– Hardware and software handshaking
• 3 Synchronous Serial Protocol controllers
– Supports I2S, SPI and generic frame-based protocols
• Two-Wire Interface
– Sequential Read/Write Operations, Philips’ I2C© compliant
• Liquid Crystal Display (LCD) interface
– Supports TFT displays
– Configurable pixel resolution supporting QCIF/QVGA/VGA/SVGA configurations.
• Image Sensor Interface
– 12-bit Data Interface for CMOS cameras
• Universal Serial Bus (USB) 2.0 High Speed (480 Mbps) Device
– On-chip Transceivers with physical interface
• 2 Ethernet MAC 10/100 Mbps interfaces
– 802.3 Ethernet Media Access Controller
– Supports Media Independent Interface (MII) and Reduced MII (RMII)
• 16-bit stereo audio bitstream DAC
– Sample rates up to 50 kHz
• On-Chip Debug System
– Nexus Class 3
– Full speed, non-intrusive data and program trace
– Runtime control and JTAG interface
• Package/Pins
– AT32AP7000: 256-ball CTBGA 1.0 mm pitch/160 GPIO pins
• Power supplies
– 1.65V to1.95V VDDCORE
– 3.0V to 3.6V VDDIO
AVR®32 32-bit
Microcontroller
AT32AP7000
Preliminary
32003M-AVR32-09/09