NSD-2101 Datasheet, PDF (4/22 Pages) ams AG – Piezo Motor Driver ASIC for SQL-RV Series Reduced Voltage SQUIGGLE® RV and UTAF™ Motors

NSD-2101
Data Sheet - Absolute Maximum Ratings
5 Absolute Maximum Ratings
Stresses beyond those listed in Table 2 may cause permanent damage to the device. These are stress ratings only, and functional operation of
the device at these or any other conditions beyond those indicated in Electrical Characteristics on page 5 is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Table 2. Absolute Maximum Ratings
Symbol
Parameter
Min Typ Max Units
Comments
V_VDD
Voltage at supply pin
-0.3
7
V
V_VDDP
Voltage at supply pin for drivers
-0.3
7
V
V_VCC
Voltage at low voltage supply pin
-0.3
5.0
V
Internal LV supply (VCC)
V_VSSP
Voltage at VSSP
-0.3
0.3
V
GND reference for drivers
V_VSS
Voltage at VSS
0
0
V
GND reference potential
V_LV
Voltage at ADR, SDA, SCL, XPD, TM -0.3
7
V
I_scr
Input current (latchup immunity)
-100
100
mA
Norm: JESD78
ESD
Electrostatic discharge
±1
Norm: MIL 883 E method 3015.
kV
Human body model: R=1.5kΩ, C=100pF,
measured and qualified only in QFN16
package.
P_tot
Total power dissipation
1
W
R_thja
Thermal resistance QFN16 4x4mm 29.7
33
36.3 K/W
Multi-Layer JEDEC board
T_strg
Storage temperature
-40
150
ºC
Tbody
Package body temperature
Norm: IPC/JEDEC J-STD-020C.
The reflow peak soldering temperature
(body temperature) specified is in
accordance with IPC/JEDEC J-STD-020C
260
ºC “Moisture/Reflow Sensitivity Classification
for Non-Hermetic Solid State Surface
Mount Devices”.
The lead finish for Pb-free leaded
packages is “Matte Tin” (100% Sn).
Humidity non-condensing
5
85
%
www.austriamicrosystems.com/NSD-2101
Revision 0.4
4 - 22