|
AMC0XXCFLKA Datasheet, PDF (7/42 Pages) Advanced Micro Devices – 1, 2, 4, or 10 Megabyte 5.0 V-only Flash Memory PC Card | |||
|
◁ |
Table 2. Attribute Memory Bus Operations
Pins/Operation
REG CE2 CE1 OE WE A0
D8âD15
D0âD7
READ-ONLY
Read (x8) (Notes 2, 4)
Read (x8) (Notes 3, 4)
Read (x8) (Note 3)
Read (x16) (Notes 3, 4, 5)
Output Disable
Standby (Note 6)
READ/WRITE
VIL
VIH
VIL
VIL
VIH
VIL
VIL
VIH
VIL
VIL
VIH
VIH
VIL
VIL
VIH
VIL
VIH
X
VIL
VIL
VIL
VIL
VIH
X
VIL
X
X
VIH
VIH
X
X
VIH
VIH
X
X
X
High-Z
High-Z
Not Valid
Not Valid
High-Z
High-Z
Data Out-Even
Not Valid
High-Z
Data Out-Even
High-Z
High-Z
Read (x8) (Notes 2, 4)
Read (x8) (Notes 3, 4)
Read (x8) (Note 4)
Read (x16) (Note 4)
Write (x8) (Notes 2, 5)
Write (x8) (Note 5)
Write (x8) (Notes 4, 5)
Write (x16) (Note 5)
Output Disable
Standby (Note 6)
VIL
VIH
VIL
VIL
VIH
VIL
VIL
VIH
VIL
VIL
VIH
VIH
VIL
VIL
VIH
VIL
VIH
X
VIL
VIL
VIL
VIL
VIH
X
VIL
VIH
VIL
VIH
VIL
VIL
VIL
VIH
VIL
VIH
VIL
VIH
VIL
VIL
VIH
VIH
VIL
X
VIL
VIL
VIL
VIH
VIL
X
VIL
X
X
VIH
VIL
X
X
VIH
VIH
X
X
X
High-Z
High-Z
Not Valid
Not Valid
High-Z
High-Z
High-Z
High-Z
High-Z
High-Z
Data Out-Even
Not Valid
High-Z
Data Out-Even
Data In-Even
High-Z
High-Z
Data In-Even
High-Z
High-Z
Legend:
X = Donât Care, where Donât Care is either VIL or VIH levels. See DC Characteristics for voltage levels of normal TTL or CMOS
input levels.
Notes:
Volt-only?
1. VPP pins are not connected in the 5.0 V-Only Flash Memory Card.
2. In this x8 mode, A0 = VIL outputs or inputs the âevenâ byte (low byte) of the x16 word on D0âD7.
3. Only even-byte data is valid during Attribute Memory Read function.
4. During Attribute Memory Read function, REG and OE must be active for the entire cycle.
5. During Attribute Memory Write function, REG and WE must be active for the entire cycle, OE must be inactive for the entire
cycle.
6. Standby current is ICCS.
5/4/98
AmC0XXCFLKA
7
|
▷ |