EP4SE230F29I4N Datasheet, PDF (46/82 Pages) Altera Corporation – Stratix IV Device Handbook

Chapter 1: DC and Switching Characteristics for Stratix IV Devices
Switching Characteristics
1–38
Table 1–30. Transceiver Block Jitter Specifications for Stratix IV GX Devices ⁽¹⁾, ⁽²⁾ (Part 3 of 9)
Symbol/
Description
Conditions
–3 Commercial/ –3 Military ⁽³⁾ and
–2 Commercial
Industrial
–4 Commercial/
Speed Grade
and –2× Commercial
Speed Grade
Industrial Speed
Grade
Unit
Total jitter at 5 Gbps
(Gen2)
Compliance pattern
Min Typ Max Min Typ Max Min Typ Max
Compliant
Compliant
—
UI
PCIe (Gen 1) Electrical Idle Detect Threshold
V_{RX-IDLE-DETDIFFp-p} ⁽¹⁶⁾
Compliance pattern
65 — 175 65 — 175 65 — 175 UI
Serial RapidIO Transmit Jitter Generation ⁽⁸⁾
Deterministic jitter
(peak-to-peak)
Data Rate = 1.25, 2.5,
3.125 Gbps
Pattern = CJPAT
— — 0.17 — — 0.17 — — 0.17 UI
Total jitter
(peak-to-peak)
Data Rate = 1.25, 2.5,
3.125 Gbps
Pattern = CJPAT
Serial RapidIO Receiver Jitter Tolerance ⁽⁸⁾
— — 0.35 — — 0.35 — — 0.35 UI
Data Rate = 1.25, 2.5,
Deterministic jitter
3.125 Gbps
tolerance (peak-to-peak)
Pattern = CJPAT
> 0.37
> 0.37
> 0.37
UI
Combined deterministic ^{Data Rate = 1.25, 2.5,}
and random jitter
3.125 Gbps
tolerance (peak-to-peak) _{Pattern = CJPAT}
> 0.55
> 0.55
> 0.55
UI
Jitter Frequency = 22.1
KHz Data Rate = 1.25,
2.5, 3.125 Gbps
> 8.5
> 8.5
> 8.5
UI
Pattern = CJPAT
Jitter Frequency = 1.875
MHz
Sinusoidal jitter
Data Rate = 1.25, 2.5,
tolerance (peak-to-peak) ^{3.125 Gbps}
Pattern = CJPAT
> 0.1
> 0.1
> 0.1
UI
Jitter Frequency =
20 MHz
Data Rate = 1.25, 2.5,
3.125 Gbps
> 0.1
> 0.1
> 0.1
UI
Pattern = CJPAT
GIGE Transmit Jitter Generation ⁽⁹⁾
Deterministic jitter
(peak-to-peak)
Pattern = CRPAT
Total jitter
(peak-to-peak)
Pattern = CRPAT
— — 0.14 — — 0.14 — — 0.14 UI
— — 0.279 — — 0.279 — — 0.279 UI
March 2014 Altera Corporation
Stratix IV Device Handbook
Volume 4: Device Datasheet and Addendum