|
AK4640_05 Datasheet, PDF (49/78 Pages) Asahi Kasei Microsystems – 16-Bit ΔΣ CODEC with MIC/HP/SPK-AMP | |||
|
◁ |
ASAHI KASEI
[AK4640]
Addr
02H
Register Name
Signal Select 1
R/W
Default
D7
MOGN
R/W
0
D6
PSMO
R/W
0
D5
DAMO
R/W
0
D4
MICM
R/W
0
D3
BPSSP
R/W
0
D2
BPMSP
R/W
0
D1
ALCS
R/W
0
D0
MOUT2
R/W
0
MOUT2: MOUT2 Output Enable (Mixing = (L+R)/2)
0: OFF (Default)
1: ON
When the MOUT2 bit = â0â, the MOUT2 pin outputs VCOM voltage. The MOUT2 pin outputs signal at the
MOUT2 bit = â1â. This bit is valid at the PMSPK bit = â1â. Hi-Z is output at the PMSPK bit = â0â.
ALCS: ALC2 to Speaker-amp Enable
0: OFF (Default)
1: ON
ALC2 output signal is mixed to Speaker-amp at the ALCS bit = â1â.
BPMSP: BEEPM to Speaker-amp Enable
0: OFF (Default)
1: ON
Mono BEEP signal (BEEPM pin) is mixed to Speaker-amp at the BPMSP bit = â1â.
BPSSP: BEEPL/BEEPR to Speaker-amp Enable
0: OFF (Default)
1: ON
Stereo BEEP signals (BEEPL/BEEPR pins) are mixed to Speaker-amp at the BPSSP bit = â1â.
MICM: Switch Control from Mic In to Mono Mixer.
0: OFF (Default)
1: ON
IPGA output signal is output through Mono Line Output (MOUT+/MOUTâpins) at the MICM bit = â1â.
DAMO: DAC to MOUT+/MOUTâ Enable
0: OFF (Default)
1: ON
DAC output signal is output through Mono Line Output (MOUT+/MOUTâ pins) at the DAMO bit = â1â.
PSMO: MOUT+/MOUTâ Output Enable (Mixing = (L+R)/2)
0: Power Save Mode (Default)
1: Normal Operation
When the PSMO bit = â0â, Mono Line Output is in power save mode and the MOUT+ and MOUTâ pins
output 0.45 x AVDD voltage.
MOGN: Gain control for mono output
0: +6dB (Default)
1: â17dB
MS0273-E-02
- 49 -
2005/04
|
▷ |