|
AKD4671-B Datasheet, PDF (22/51 Pages) Asahi Kasei Microsystems – stereo CODEC with built-in Microphone-Amplifier | |||
|
◁ |
 The function of the toggle SW
[SW2] (PDN) : Power down of AK4671. Keep âHâ during normal operation.
[SW1] (DIR) : Power down of AK4114. Keep âHâ during normal operation.
Keep âLâ when AK4114 is not used.
[AKD4671-B]
 Indication for LED
[LED1] (ERF) : Monitor INT0 pin of the AK4114. LED turns on when some error has occurred to AK4114.
 Serial Control
The AK4671 can be controlled via the printer port (parallel port) of IBM-AT compatible PC. Connect PORT5
(CTRL) with PC by 10 wire flat cable packed with the AKD4671.Table 4 shows switch and jumper settings for
serial control. I2C Mode should be selected in Table 4.
Note) When evaluate it in SAR-ADC of AK4671, 4-WIRE Mode should be selected in Table 4.
PORT5
Connect
CSN
CCLK/SCL
PC
CDTI/SDA AKD4671
CDTO/SDA
10 wire 10pin
flat cable Connector
10pin
Header
Figure 2. Connect of 10 wire flat cable
Mode
4-WIRE
I2C CAD0=0
CAD0=1
S1 (DIP SW)
JP52
I2C
CAD0
CTRL_SEL
OFF
OFF
4-WIRE
ON
OFF
I2C
ON
ON
Table 4. Serial Control Setting
JP53
CTRL_SEL2
4-WIRE
I2C
Default
<KM089000>
- 22 -
2007 / 05
|
▷ |