AK4456 Datasheet, PDF (10/84 Pages) Asahi Kasei Microsystems – 115dB 768kHz Advanced 32-bit DAC

[AK4456]
6. Absolute Maximum Ratings
(AVSS =DVSS =0V; Note 5)
Parameter
Symbol
Min.
Max.
Unit
Power Supplies:
Analog
Digital I/O
AVDD
0.3
TVDD
0.3
6.0
V
4.0
V
Digital Core
|AVSS  DVSS|
VDD18
0.3
GND
-
2.5
V
0.3
V
Input Current, Any Pin Except Supplies
IIN
-
10
mA
Digital Input Voltage
VIND
0.3
TVDD+0.3
V
Ambient Temperature (Power applied)
When the back tab is connected to VSS
Ta
40
105
C
When the back tab is open
Ta
40
85
C
Storage Temperature
Tstg
65
150
C
Note 5. All voltages with respect to ground.
Note 6. AVSS and DVSS must be connected to the same analog ground plane.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
7. Recommended Operation Conditions
(AVSS =DVSS =0V; Note 5)
Parameter
Symbol
Min
Typ. Max. Unit
Analog
AVDD
3.0
5.0
5.5
V
Power Supplies
(LDOE pin= “L”) (Note 7)
I/O buffer
TVDD
VDD18
1.8
3.6
V
Digital
VDD18
1.7
1.8
1.98 V
(LDOE pin = “H”)(Note 8)
I/O buffer
TVDD
3.0
3.3
3.6
V
Voltage Reference
“H” voltage reference “L”
voltage reference
VREFH1-3 AVDD0.5 -
AVDD V
VREFL1-3
-
AVSS
-
V
Note 7. When the LDOE pin = “L” VDD18 must be powered up either at the same time or after TVDD is
powered up. The power up sequence between AVDD and TVDD or AVDD and VDD18 is not critical.
Note 8. When LDOE pin = “H”, the internal LDO supplies 1.8V (typ). The power up sequences between
AVDD and TVDD, AVDD and VDD18 are not critical.
* AKM assumes no responsibility for the usage beyond the conditions in this data sheet.
015006886-E-00
- 10 -
2015/06