ADSP-BF608BBCZ-5 Datasheet, PDF (51/112 Pages) Analog Devices – Blackfin Dual Core Embedded Processor

ADSP-BF606/ADSP-BF607/ADSP-BF608/ADSP-BF609
Table 15. ADSP-BF60x Designer Quick Reference (Continued)
Signal Name Type
USB0_DP
I/O
Driver Int
Type _Term
F
none
Reset
Term
none
Reset
Drive
none
Hiber
Term
none
Hiber
Drive
none
Power
Domain
VDD_USB
USB0_ID
I/O
na
none none none pu
none VDD_USB
USB0_VBC I/O
E
USB0_VBUS I/O
G
none none none none none VDD_USB
none none none none none VDD_USB
VDD_DMC s
na
none none none none none na
VDD_EXT
s
VDD_INT
s
VDD_TD
s
na
none none none none none na
na
none none none none none na
na
none none none none none na
VDD_USB
s
na
none none none none none na
VREF_DMC s
na
none none none none none na
Description
and Notes
Desc: USB0 Data +.
Notes: Pull low if not using USB. For
complete documentation of hibernate
behavior when USB is used, see the USB
chapter in the processor hardware
reference.
Desc: USB0 OTG ID.
Notes: If USB is not used, connect to
ground. When USB is being used, the
internal pull-up resistor that is present
during hibernate is programmable. See
the USB chapter in the processor
hardware reference. Active during reset.
Desc: USB0 VBUS Control.
Notes: If USB is not used, pull low.
Desc: USB0 Bus Voltage.
Notes: If USB is not used, connect to
ground.
Desc: VDD for DMC.
Notes: If the DMC is not used, connect to
VDD_INT.
Desc: External VDD.
Notes: Must be powered.
Desc: Internal VDD.
Notes: Must be powered.
Desc: VDD for Thermal Diode.
Notes: If the thermal diode is not used,
connect to ground.
Desc: VDD for USB.
Notes: If USB is not used, connect to VDD_
EXT.
Desc: VREF for DMC.
Notes: If the DMC is not used, connect to
VDD_INT.
Rev. 0 | Page 51 of 112 | June 2013