ADP5586 Datasheet, PDF (29/44 Pages) Analog Devices – Keypad Decoder and I/O Port Expander

Data Sheet
ADP5586
GPI_INTERRUPT_EN_A, Register 0x1F
Table 40. GPI_INTERRUPT_EN_A Bit Descriptions
Bits
Bit Name
Access
[7:6] Reserved
Reserved
5
GPI_6_INT_EN
Read/write
4
GPI_5_INT_EN
Read/write
3
GPI_4_INT_EN
Read/write
2
GPI_3_INT_EN
Read/write
1
GPI_2_INT_EN
Read/write
0
GPI_1_INT_EN
Read/write
Description
Reserved.
0 = GPI_6_INT is disabled.
1 = GPI_6_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_6_INT
is set and the GPI 6 interrupt condition is met.
0 = GPI_5_INT is disabled.
1 = GPI_5_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_5_INT
is set and the GPI 5 interrupt condition is met.
0 = GPI_4_INT is disabled.
1 = GPI_4_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_4_INT
is set and the GPI 4 interrupt condition is met.
0 = GPI_3_INT is disabled.
1 = GPI_3_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_3_INT
is set and the GPI 3 interrupt condition is met.
0 = GPI_2_INT is disabled.
1 = GPI_2_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_2_INT
is set and the GPI 2 interrupt condition is met.
0 = GPI_1_INT is disabled.
1 = GPI_1_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_1_INT
is set and the GPI 1 interrupt condition is met.
GPI_INTERRUPT_EN_B, Register 0x20
Table 41. GPI_INTERRUPT_EN_B Bit Descriptions
Bits
Bit Name
Access
[7:5] Reserved
Reserved
4
GPI_11_INT_EN
Read/write
3
GPI_10_INT_EN
Read/write
2
GPI_9_INT_EN
Read/write
1
GPI_8_INT_EN
Read/write
0
GPI_7_INT_EN
Read/write
Description
Reserved.
0 = GPI_11_INT is disabled.
1 = GPI_11_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1)
if GPI_11_INT is set and the GPI 11 interrupt condition is met.
0 = GPI_10_INT is disabled.
1 = GPI_10_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1)
if GPI_10_INT is set and the GPI 10 interrupt condition is met.
0 = GPI_9_INT is disabled.
1 = GPI_9_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_9_INT
is set and the GPI 9 interrupt condition is met.
0 = GPI_8_INT is disabled.
1 = GPI_8_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_8_INT
is set and the GPI 8 interrupt condition is met.
0 = GPI_7_INT is disabled.
1 = GPI_7_INT enabled. Asserts the GPI_INT bit (Register 0x01, Bit 1) if GPI_7_INT
is set and the GPI 7 interrupt condition is met.
Rev. 0 | Page 29 of 44