82-000225-01 Datasheet, PDF (25/34 Pages) Analog Devices – ICE-100B Emulator Users Guide

Hardware Description
Figure 2-2 shows a portion of the ICE-100B emulator.
Figure 2-2. Resetting the Target
To reset the target via the software, use the Reset Target command.
• CCES users choose Target > Debug > Reset Target.
• VisualDSP++ users choose Debug > Reset Target.
The Reset Target command sends a reset pulse of the specified reset time
duration to the target and opens the Reset Target Options dialog box. See
the online help for the dialog box description.
Custom Processor Boards
When designing a custom processor board using Analog Devices
processors and DSPs, special care must be taken to ensure that the JTAG
interface is designed and laid out correctly. If the board is not designed
correctly, communication via the JTAG port may not work. Another side
effect may be that the interface works, but you are not able to run at the
highest possible JTAG clock frequency. The JTAG clock frequency is
ICE-100B Emulator User’s Guide
2-3