82-000225-01 Datasheet, PDF (23/34 Pages) Analog Devices – ICE-100B Emulator Users Guide

2 HARDWARE DESCRIPTION
This chapter describes the hardware design of the ICE-100B emulator and
includes the following sections:
• “LEDs” on page 2-1
Describes LEDs which inform you of the emulator’s status.
• “Resetting the Target” on page 2-2
Describes how to reset the target.
• “Custom Processor Boards” on page 2-3
Describes concerns regarding board lay out.
• “Mechanical Specifications” on page 2-4
Provides dimensional information.
LEDs
Three LEDs are located on the ICE-100B emulator (refer to Figure 2-1):
• PWR LED - The Power LED signifies that the ICE is powered.
• MON LED - The Monitor LED signifies that the ICE is configured
over USB.
• STAT LED - The Status LED signifies that the ICE is ignoring the
EMU signal.
ICE-100B Emulator User’s Guide
2-1