82-000225-01 Datasheet, PDF (18/34 Pages) Analog Devices – ICE-100B Emulator Users Guide

ICE-100B Installation Tasks
Verifying Driver Installation and Attaching to an
Emulation Target
Before using the ICE-100B emulator, verify that the driver software is
installed properly.
1. Open the Windows Device Manager and verify that the ICE-100B
emulator appears under ADI Development Tools, as shown in
Figure 1-2.
Figure 1-2. Verifying Driver Installation
2. Connect the 14-pin header (J1) of the ICE-100B emulator to the
target board via the JTAG interface as follows.
1-6
ICE-100B Emulator User’s Guide