82-000225-01 Datasheet, PDF(16/34 Page) Analog Devices

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

82-000225-01 Datasheet, PDF (16/34 Pages) Analog Devices – ICE-100B Emulator Users Guide

◁

ICE-100B Installation Tasks

Configuring and Connecting the JTAG Interface

1. Select the operating voltage of the target processorâs JTAG inter-

face. The ICE-100B emulator ships with a jumper (JP1) on

positions 1 and 3, and 2 and 4 (default). Refer to Table 1-1 and

Figure 1-2.

Table 1-1. Operating Voltage

Target Voltage

3.3 volts

2.5 volts

1.8 volts

JP1 Settings (Installed Jumpers)

1 and 3, 2 and 4

1 and 2, 3 and 4

3 and 5, 2 and 4

Figure 1-1. JP1 Pinout

2. Ensure that JP2 does not have a jumper across the pins when using

VisualDSP++ or CrossCore Embedded Studio. Refer to Table 1-2.

There may be a jumper hanging off one pin; this does not impact

operation.

Table 1-2. JP2 Settings

JP2 Settings

Uninstalled

Installed

Tool Chain

VisualDSP++ or CCES

GNU tool chain for Blackfin processors

1-4

ICE-100B Emulator Userâs Guide

▷