A3P1000-1FGG144I Datasheet, PDF (61/206 Pages) Actel Corporation – ProASIC3 Flash Family FPGAs

ProASIC3 DC and Switching Characteristics
Timing Characteristics
Table 2-61 • 1.8 V LVCMOS High Slew
Commercial-Case Conditions: T_J = 70°C, Worst-Case V_CC = 1.425 V, Worst-Case V_CCI = 1.7 V
Applicable to Advanced I/O Banks
Drive
Strength
2 mA
Speed
Grade
–F
t_DOUT
0.79
t_DP
14.25
t_DIN
0.05
t_PY
1.46
t_EOUT
0.51
t_ZL
10.97
t_ZH
14.25
t_LZ
3.33
t_HZ
1.99
t_ZLS
13.66
t_ZHS
16.94
Units
ns
Std. 0.66 11.86 0.04 1.22 0.43 9.14 11.86 2.77 1.66 11.37 14.10 ns
–1 0.56 10.09 0.04 1.04 0.36 7.77 10.09 2.36 1.41 9.67 11.99 ns
–2 0.49 8.86 0.03 0.91 0.32 6.82 8.86 2.07 1.24 8.49 10.53 ns
4 mA
–F 0.79 8.31 0.05 1.46 0.51 7.04 8.31 3.87 3.41 9.73 10.99 ns
Std. 0.66 6.91 0.04 1.22 0.43 5.86 6.91 3.22 2.84 8.10 9.15 ns
–1 0.56 5.88 0.04 1.04 0.36 4.99 5.88 2.74 2.41 6.89 7.78 ns
–2 0.49 5.16 0.03 0.91 0.32 4.38 5.16 2.41 2.12 6.05 6.83 ns
6 mA
–F 0.79 5.34 0.05 1.46 0.51 5.02 5.34 4.24 4.06 7.71 8.03 ns
Std. 0.66 4.45 0.04 1.22 0.43 4.18 4.45 3.53 3.38 6.42 6.68 ns
–1 0.56 3.78 0.04 1.04 0.36 3.56 3.78 3.00 2.88 5.46 5.69 ns
–2 0.49 3.32 0.03 0.91 0.32 3.12 3.32 2.64 2.53 4.79 4.99 ns
8 mA
–F 0.79 4.71 0.05 1.46 0.51 4.72 4.71 4.32 4.23 7.40 7.40 ns
Std. 0.66 3.92 0.04 1.22 0.43 3.93 3.92 3.60 3.52 6.16 6.16 ns
–1 0.56 3.34 0.04 1.04 0.36 3.34 3.34 3.06 3.00 5.24 5.24 ns
–2 0.49 2.93 0.03 0.91 0.32 2.93 2.93 2.69 2.63 4.60 4.60 ns
12 mA
–F 0.79 4.24 0.05 1.46 0.51 4.32 3.65 4.45 4.90 7.01 6.34 ns
Std. 0.66 3.53 0.04 1.22 0.43 3.60 3.04 3.70 4.08 5.84 5.28 ns
–1 0.56 3.01 0.04 1.04 0.36 3.06 2.59 3.15 3.47 4.96 4.49 ns
–2 0.49 2.64 0.03 0.91 0.32 2.69 2.27 2.76 3.05 4.36 3.94 ns
16 mA
–F 0.79 4.24 0.05 1.46 0.51 4.32 3.65 4.45 4.90 7.01 6.34 ns
Std. 0.66 3.53 0.04 1.22 0.43 3.60 3.04 3.70 4.08 5.84 5.28 ns
–1 0.56 3.01 0.04 1.04 0.36 3.06 2.59 3.15 3.47 4.96 4.49 ns
–2 0.49 2.64 0.03 0.91 0.32 2.69 2.27 2.76 3.05 4.36 3.94 ns
Notes:
1. Software default selection highlighted in gray.
2. For specific junction temperature and voltage supply levels, refer to Table 2-6 on page 2-6 for derating
values.
v1.3
2 - 47