DS092 Datasheet, PDF (3/12 Pages) Xilinx, Inc – As fast as 4.0 ns pin-to-pin logic delays

R
XC2C64 CoolRunner-II CPLD
Absolute Maximum Ratings
Symbol
Description
Value
Units
V_CC
Supply voltage relative to ground
–0.5 to 2.0
V
V_CCIO
Supply voltage for output drivers
–0.5 to 4.0
V
V_JTAG
JTAG input voltage limits
–0.5 to 4.0
V
V_AUX
V_IN
V_TS
JTAG input supply voltage
Input voltage relative to ground⁽¹⁾
Voltage applied to 3-state output⁽¹⁾
–0.5 to 4.0
V
–0.5 to 4.0
V
–0.5 to 4.0
V
T_STG
Storage Temperature (ambient)
–65 to +150
°C
T_SOL
Maximum Soldering temperature (10s @ 1/16in. = 1.5mm)
+260
°C
T_J
Junction Temperature
+150
°C
Notes:
1. Maximum DC undershoot below GND must be limited to either 0.5V or 10 mA, whichever is easiest to achieve. During transitions,
the device pins may undershoot to –2.0v or overshoot to +4.5V, provided this over or undershoot lasts less than 10 ns and with the
forcing current being limited to 200 mA.
Recommended Operating Conditions
Symbol
Parameter
Min
V_CC
Supply voltage for internal logic Commercial T_A = 0°C to +70°C
1.7
and input buffers
Industrial T_A = –40°C to +85°C
1.7
V_CCIO
Supply voltage for output drivers @ 3.3V operation
3.0
Supply voltage for output drivers @ 2.5V operation
2.3
Supply voltage for output drivers @ 1.8V operation
1.7
Supply voltage for output drivers @ 1.5V operation
1.4
V_AUX
JTAG programming pins
1.7
DC Electrical Characteristics (Over Recommended Operating Conditions)
Max Units
1.9
V
1.9
V
3.6
V
2.7
V
1.9
V
1.6
V
3.6
V
Symbol
I_CCSB
I_CCSB
I_CC
Parameter
Standby current (-5, -7)
Standby current (-4)
Dynamic current (-5, -7)
I_CC
Dynamic current (-4)
C_JTAG
C_CLK
C_IO
JTAG input capacitance
Global clock input capacitance
I/O capacitance
Test Conditions
V_CC = 1.9V, V_CCIO = 3.6V
V_CC = 1.9V, V_CCIO = 3.6V
f = 1 MHz
f = 50 MHz
f = 1 MHz
f = 50 MHz
f = 1 MHz
f = 1 MHz
f = 1 MHz
Min.
Max.
100
Units
µA
mA
mA
mA
mA
mA
pF
pF
pF
DS092 (v1.2) May 13, 2002
www.xilinx.com
3
Advance Product Specification
1-800-255-7778