BFC3366Y2 Datasheet, PDF (8/12 Pages) Vishay Siliconix – Interference Suppression Film Capacitors MKP Radial Potted Type

Not for New Design - Please refer to MKP338 6 Y2 (28114)
www.vishay.com
MKP336 6 Y2
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
D
SUB-CLAUSE NUMBER AND TEST
OR
ND
CONDITIONS
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
D
4.7 Vibration
Visual examination
Mounting: See section “Mounting” of this
specification
Procedure B4
Frequency range: 10 Hz to 55 Hz.
Amplitude: 0.75 mm or
Acceleration 98 m/s2
(whichever is less severe)
Total duration 6 h
PERFORMANCE REQUIREMENTS
No visible damage
4.7.2 Final inspection
Visual examination
No visible damage
4.9 Shock
Mounting: See section “Mounting” for
more information
Pulse shape: Half sine
Acceleration: 490 m/s2
Duration of pulse: 11 ms
4.9.2 Final measurements
Visual examination
No visible damage
Capacitance
|C/C|  5 % of the value measured
initially
Tangent of loss angle
Increase of tan :
 0.008
Compared to values measured initially
Insulation resistance
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
D
C1A AND C1B
4.11 Climatic sequence
As specified in section “Insulation
Resistance” of this specification
4.11.1 Initial measurements
Capacitance
Measured in 4.4.2 and 4.9.2
Tangent of loss angle:
Measured initially in C1A and C1B
4.11.2 Dry heat
Temperature: 105 °C
Duration: 16 h
4.11.3 Damp heat cyclic
Test Db
First cycle
4.11.4 Cold
Temperature: - 55 °C
Duration: 2 h
4.11.5 Damp heat cyclic
Test Db
remaining cycles
Revision: 11-Dec-12
8
Document Number: 28115
For technical questions, contact: [e-mail]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000