|
BFC3366Y2 Datasheet, PDF (10/12 Pages) Vishay Siliconix – Interference Suppression Film Capacitors MKP Radial Potted Type | |||
|
◁ |
Not for New Design - Please refer to MKP338 6 Y2 (28114)
www.vishay.com
MKP336 6 Y2
Vishay BCcomponents
GROUP C INSPECTION REQUIREMENTS
D
SUB-CLAUSE NUMBER AND TEST
OR
ND
CONDITIONS
SUB-GROUP C3
D
4.14.7 Final measurements
Visual examination
Capacitance
Tangent of loss angle
PERFORMANCE REQUIREMENTS
No visible damage
Legible marking
|ïC/C| ï£ 10 % compared to values
measured in 4.13.1.
Increase of tan ï¤:
ï£ 0.007
Compared to values measured in 4.13.1.
Voltage proof
2250 VDC;
1 min between terminations
No permanent breakdown or flash-over
SUB-GROUP C4
4.15 Charge and discharge
4.15.1 Initial measurements
4.15.3 Final measurements
Insulation resistance
D
10 000 cycles
(50 c/s) charge to UR half sinewave
Duration: 5 ms
Discharge resistance:
R
=
---------------4----2---0-----V----D----C----------------
1.5 x Cï¨ï¨dUï©/ï¨dtï©ï©
Rmin. = 2.2 ï
Capacitance
Tangent of loss angle at 10 kHz
Capacitance
Tangent of loss angle
SUB-GROUP C5
4.16 Radio frequency characteristic
Insulation resistance
D
Resonance frequency
ï³ 50 % of values specified in section
âInsulation resistanceâ of this
specification
|ïC/C| ï£ 10 % compared to values
measured in 4.15.1.
Increase of tan ï¤:
ï£ 0.008
Compared to values measured in 4.15.1.
ï³ 50 % of values specified in section
âInsulation resistanceâ of this
specification
As specified in section âResonant
frequencyâ of this specification. ± 10 %
Revision: 11-Dec-12
10
Document Number: 28115
For technical questions, contact: rfi@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
|
▷ |